六角頭自鉆自攻螺釘 DIN EN ISO 15480 

六角頭木螺釘 Din 571
內六角緊定螺釘凹端 Din 916
內六角緊定螺釘截錐端 Din 914
彈簧墊圈 DIN 128
十字槽圓頭螺釘 DIN 7996
牙條 DIN 975
開槽盤頭螺釘 DIN 85-72
十字槽球面圓柱頭螺釘 DIN 7985-86
內六角緊定螺釘導向圓柱端 Din 915
內六角緊定螺釘平端 Din 913
六角法蘭面螺母 DIN EN 1661
• 1型六角螺母產品等級ABDIN EN ISO 4032
方螺母產品等級CDIN 557
六角凸緣頭自鉆自攻螺釘 DIN EN ISO 15480
十字槽盤頭自鉆自攻螺釘 DIN EN ISO 15481
平圓頭方頸螺栓 DIN 603
圓柱頭內六角螺釘 DIN EN ISO 4762
內六角平圓頭螺釘 DIN EN ISO 7380
薄圓柱頭內六角螺釘 DIN 6912
六角頭螺栓全螺紋產品等級ABDIN EN ISO 4017
螺桿 DIN 976-1
內六角沉頭螺釘 DIN EN ISO 10642

所有DIN標準
螺栓
焊接螺栓 Weld screws with metric head
DIN 34817
方頭凸緣螺栓 Squate head bolts with collar
DIN 478
平圓頭方頸螺栓 Mushroom head square neck bolts
DIN 603
沉頭帶榫螺栓 Flat countersunk nib bolts
DIN 604
沉頭高方頸螺栓 Flat countersunk square neck bolts with long square
DIN 605
半圓頭帶榫螺栓 Cup head nib bolts
DIN 607
沉頭短方頸螺栓 Flat countersunk square neck bolts with short square
DIN 608
六角花形大法蘭面鋼制螺栓 Steel hexalobular head bolts with large flange
DIN 34801
六角頭鉸制孔用螺栓 Hexagon fit bolts
DIN 609
• M42-M160*6 六角頭螺栓產品等級BM42 to M160*6 hexagon head bolts - Product grade B
DIN 931-2
六角法蘭面螺栓小系列 Hexagon bolts with flange - Small series
DIN EN 1662
六角法蘭面螺栓加大系列 Hexagon bolts with flange - Heavy series
DIN EN 1665 | 代替DIN 6921|DIN 6922
六角頭螺栓-產品等級B級-細桿(桿徑近似等于中徑) Hexagon head bolts with reduced shank(shank diameter=pitch diameter)-Product grade B
DIN EN 24015
六角頭螺栓產品等級ABHexagon head bolts - Product grades A and B
DIN EN ISO 4014 | 代替DIN 931-1
六角頭螺栓產品等級CHexagon head bolts - Product grade C
DIN EN ISO 4016 | 代替DIN 601
六角頭螺栓全螺紋產品等級ABHexagon head screws - Product grade A and B
DIN EN ISO 4017 | 代替DIN 933
六角頭螺栓全螺紋產品等級CHexagon head screws - Product grade C
DIN EN ISO 4018 | 代替DIN 558
六角頭螺栓細牙全螺紋產品等級ABHexagon head screws with metric fine pitch thread - Product grade A and B
DIN EN ISO 8676 | 代替DIN 961
六角頭螺栓細牙產品等級ABHexagon head bolts with fine pitch thread - Product grades A and B
DIN EN ISO 8765 | 代替DIN 960
鋼結構用大六角頭高強度螺栓 High-strength hexagon head bolts with large widths across flats for structural steel bolting
DIN 6914
短螺紋端的六角頭鉸制孔用螺栓
DIN 610-84
粗桿六角頭螺栓 重量
DIN 931-87(3)
• Clevis pins
DIN 1445
• Plain washers for metric bolts,screws and nuts .for general purposes General plan
DIN EN ISO 887
• Hexagon head bolts with metric fine pitch thread(Product grade A and B)
DIN EN ISO 8765
• Thread run-outs and thread undercuts for ISO metric threads as in IND 13-1
DIN 76-1
• Thread run-outs and thread undercuts
DIN 76
• Bolt end protrusions
DIN 78
• Diameters of counterbores(holes)
DIN 974
• Split pin holes and wire holes in bolts,screws and studs
DIN 34803
• Bolts,screws,studs and nuts
DIN EN 20225
• Clearance holes for bolts and screws
DIN EN 20273
• T形頭螺栓 ISO general purpose metric screw threads. General plan
DIN ISO 261
一般用途螺栓和螺釘.米制系列.端頭半徑 General purpose bolts and screws-metric series
DIN ISO 885
• T型螺栓
188
• T型螺栓
186
螺釘
方頭短圓柱端緊定螺釘 Square head bolts with short dog point
DIN 479
方頭短圓柱球面端緊定螺釘 Square head bolts with collar and oval half dog point
DIN 480
開槽圓柱頭螺釘產品等級ASlotted cheese head screws-Product grade A
DIN EN ISO 1207 | 代替DIN 84
開槽沉頭螺釘(通用頭型)-產品等級ASlotted pan head screws-Product grade A
DIN EN ISO 1580 | 代替DIN 85
開槽沉頭螺釘(通用頭型)-產品等級ASlotted countersunk flat head screws(common head style)
DIN EN ISO 2009 | 代替DIN 963
開槽半沉頭螺釘(通用頭型)-產品等級ACountersunk slotted raised head screws(common head style)-Produce grade A
DIN EN ISO 2010 | 代替DIN 964
十字槽盤頭凸緣螺釘產品等級AProduct grade A cross recessed pan head screws with collar
DIN 967
十字槽沉頭(通用頭型)螺釘-產品等級A級-第2部分:性能等級 鋼 8.8級、不銹鋼和有色金屬 Cross recessed countersunk flat head screws (common head style),product grade A-Part2:Steel of property class 8.8,stainless steel and nonferous metals
DIN EN ISO 7046-2 | 代替DIN 965
開槽盤頭螺釘
DIN 85-72
開槽十字孔螺釘
DIN 404-86
開槽小盤頭螺釘
DIN 920-86
十字槽沉頭自鉆自攻螺釘 Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482
十字槽半沉頭自鉆自攻螺釘 Cross recessed raised countersunk head drilling screws with tapping screw thread
DIN EN ISO 15483
內六角緊定螺釘平端 Hexagon socket set screws with flat point
Din 913
內六角緊定螺釘截錐端 Hexagon socket set screws with cone point
Din 914
內六角緊定螺釘導向圓柱端 Hexagon socket set screws with dog point
Din 915
內六角緊定螺釘凹端 Hexagon socket set screws with cup point
Din 916
十字槽圓頭螺釘 Cross recessed round head screws
DIN 7996
十字槽沉頭自攻螺釘(通用頭型) Cross recessed countersunk (flat) head tapping screws(common head style)
ISO 7050 | 代替DIN 7982
十字槽半沉頭自攻螺釘 Cross recessed raised countersunk (oval) head tapping screws
ISO 7051 | 代替DIN 7983
小六角頭長圓柱導向端緊定螺釘 Hexagon set screws with small hexangon and full dog point
DIN 561
小六角頭短圓柱導向錐端緊定螺釘 Hexagon set screws with samll hexagon,half dog point and flat cone point
DIN 564
鋼結構用大六角頭高強度螺栓和六角螺母連接副 Steel hexagon fit bolts for structural steel bolting for supply with hexagon nuts
DIN 7968
鋼結構用六角頭螺栓和六角螺母連接副 Steel hexagon head bolts for structural steel bolting for supply with hexagon nuts
DIN 7990
十字槽半沉頭(通用頭型)螺釘-產品等級ACountersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A
DIN EN ISO 7047 | 代替DIN 966
十字槽圓柱頭螺釘 Cross recessed cheese head screws
DIN EN ISO 7048
滾花指旋螺釘
DIN 464-86
滾花薄頭指旋螺釘
DIN 653-80
帶螺桿的六角頭螺釘
DIN 7964-77
開槽大盤頭螺釘
DIN 921-86
十字槽球面圓柱頭螺釘
DIN 7985-86
• Designation system for fasteners
DIN 962
• Plastic washers. Standard series
DIN 34815
• Slotted set screws with flat point
DIN EN 24766
• Slotted set screws with cone point
DIN EN 27434
• Slotted set screws with long dog point
DIN EN 27435
• Slotted set screws with cup point
DIN EN 27436
• Slotted cheese head screws
DIN EN ISO 1207
• Slotted pan head screws
DIN EN ISO 1580
• Slotted countersunk flat head screws (common head style)
DIN EN ISO 2009
• Countersunk slotted raised head screws(common head style)
DIN EN ISO 2010
• Slotted headless screws with shand
DIN EN ISO 2342
• Hexagon head screws(Product grade A and B)
DIN EN ISO 4017
• Hexagon head screws(Product grade C)
DIN EN ISO 4018
• Hexagon socket set screws with flat point
DIN EN ISO 4026
• Hexagon socket set screws with cone point
DIN EN ISO 4027
• Hexagon socket set screws with dog point
DIN EN ISO 4028
• Hexagon socket set screws with cup point
DIN EN ISO 4029
• Hexagon socket head cap screws
DIN EN ISO 4762
• Pan head screws with H or type Z cross recess(Product grade A)
DIN EN ISO 7045
• Countersunk flat head screws(common head style)with type H or type Z cross recess(Product grade A)
DIN EN ISO 7046-1
• Countersunk flat head screws(common head style)with type H or type Z cross recess(Product grade A)
DIN EN ISO 7047
• Countersunk flat head screws
DIN EN ISO 7048
• Hexagon socket button head screws
DIN EN ISO 7380
• Hexagon head screws with metric fine pitch thread(Product grade A and B)
DIN EN ISO 8676
• Tapping screw and washer assemblies with plain washers
DIN EN ISO 10510
• Hexagon socket countersunk head screws
DIN EN ISO 10642
• Hexalobular socket head cap screws
DIN EN ISO 14579
• Hexalobular socket cheese head screws
DIN EN ISO 14580
• Hexalobular socket pan head screws
DIN EN ISO 14583
• Hexalobular socket raised countersunk head screws
DIN EN ISO 14584
• Scres and washer assemblies with plain washers(Washer hardness classes 200 HV and 300 HV)
DIN EN ISO 10644
• Hexalobular socket pan head tapping screws
DIN EN ISO 14585
• Hexalobular socket countersunk head
DIN EN ISO 14586
• Hexalobular socket raised countersunk(oval)head tapping screws
DIN EN ISO 14587
• Hexagon washer head drilling screws with tapping screw thread
DIN EN ISO 15480
• Cross recessed pan head drilling screws with tapping screw thread
DIN EN ISO 15481
• Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482
• Cross recessed raisedcountersunk head drilling screws with tapping screw thread
DIN EN ISO 15483
• Countersinks. For countersunk head screws
DIN 66
• Countersinks. For countersunk head screws
DIN 74
• Screw threads
DIN 202
• Thread rolling screws
DIN 7500
• Tapping screw connections
DIN 7975
• Threads and thread ends
DIN 7998
• Wire thread inserts for ISO metric screw threads
DIN 8140-1
• Countersunk head screws
DIN EN 27721
• Tapping screw threads
DIN EN ISO 1478
十字槽螺絲 Cross recesses for screws
DIN EN ISO 4757
螺栓和螺釘用內板擰的六角花形 Hexalobular internal driving feature for bolts and screws
DIN EN ISO 10664
十字槽沉頭螺釘 ISO general purpose metric screw threads-tolerances
DIN ISO 965
十字槽沉頭螺釘 ISO general purpose metric screw threads-tolerances
DIN ISO 965-2
十字槽沉頭螺釘 ISO general purpose metric screw threads-tolerances
DIN ISO 965-3
十字槽沉頭螺釘 ISO general purpose metric screw threads-tolerances
DIN ISO 965-4
十字槽沉頭螺釘 ISO general purpose metric screw threads-tolerances
DIN ISO 965-5
內六角螺釘
內六角沉頭螺釘 Hexagon socket countersunk head screws
DIN EN ISO 10642 | 代替DIN 7991
薄圓柱頭內六角螺釘 Hexagon socket thin head cap screws
DIN 7984
圓柱頭內六角螺釘 Hexagon socket head cap screws
DIN EN ISO 4762 | 代替DIN 912
內六角平圓頭螺釘 Hexagon socket button head screws
DIN EN ISO 7380
圓柱頭內六角花形鋼制螺釘 Steel hexalobular head cap screws with large driving feature
DIN 34802
薄圓柱頭內六角螺釘 Hexagon socket thin head cap screws with pilot recess for wrench key
DIN 6912
六角花形小法蘭面鋼制螺栓 Steel hexalobular head bolts with small flange
DIN 34800
自攻螺釘
六角頭自鉆自攻螺釘 Hexagon washer head drilling screws with tapping screw thread
DIN EN ISO 15480 | 代替DIN 7504
六角凸緣頭自鉆自攻螺釘 Hexagon washer head drilling screws with tapping screws thread
DIN EN ISO 15480
十字槽盤頭自鉆自攻螺釘 Cross recessed pan head drilling screws with tapping screw thread
DIN EN ISO 15481
十字槽盤頭自鉆自攻螺釘 Cross recessed pan head drlling screws with tapping screw thread
DIN EN ISO 15481 | 代替DIN 7504
十字槽沉頭自鉆自攻螺釘 Cross recessed countersunk head drilling screws with tapping screw thread
DIN EN ISO 15482 | 代替DIN 7504
十字槽半沉頭自鉆自攻螺釘 Cross recessed raised counterunk head drilling screws with tapping screw thread
DIN EN ISO 15483 | 代替DIN 7504
自鉆自攻螺釘 Drilling screws with tapping screw thread
DIN EN ISO 10666 | 代替DIN 7504
六角頭和開槽頭三角牙螺釘尺寸、技術要求及試驗 Hexagon head and slotted head thread cutting screws - Dimensions,requirements and testing
DIN 7513
十字槽螺紋滾成自攻螺釘尺寸、技術要求及試驗 Cross recessed head thread cutting screws - Dimensions,requirements and testing
DIN 7516
米制螺紋滾成自攻螺釘型式、名稱及技術要求 ISO metric thread rolling screws - Types,designation and requirements
DIN 7500-1
米制螺紋滾成自攻螺釘預制孔直徑尺寸方案 Tread rolling screws for ISO metric thread - Guideline values for hole diameters
DIN 7500-2
緊固件供貨技術條件米制螺紋性能等級為10.9級的螺紋滾成自攻螺釘 Technical delivery conditions for fasteners - Metric thread rolling screws of property class 10.9
DIN 267-30
十字槽盤頭凸緣自攻螺釘 Cross recessed pan head tapping screws with collar
DIN 968
六角凸緣自攻螺釘 Hexagon washer head tapping screws
DIN 6928
自攻螺釘用螺紋 Tapping screw threads
DIN EN ISO 1478 | 代替DIN 7970
六角頭自攻螺釘 Hexagon head tapping screws
ISO 1479 | 代替DIN 7976
開槽盤頭自攻螺釘 Slotted pan head tapping screws
ISO 1481 | 代替DIN 7971
開槽沉頭自攻螺釘(通用頭型) Slotted countersunk(flat)head tapping screws(common head style)
ISO 1482 | 代替DIN 7972
開槽半沉頭自攻螺釘(通用頭型) Slotted raised countersunk (oval) head tapping screws(common head style)
ISO 1483 | 代替DIN 7973
十字槽盤頭自攻螺釘 Cross recessed pan head tapping screws
ISO 7049 | 代替DIN 7981
木螺釘
開槽半沉頭木螺釘 Slotted raised countersunk(oval) head wood screws
Din 95
開槽半圓頭木螺釘 Slotted round head wood screws
Din 96
開槽沉頭木螺釘 Slotted countersunk(flat) head wood screws
Din 97
六角頭木螺釘 Hexagon wood screws
Din 571
十字沉頭木螺釘 Cross recessed countersunk (flat) head wood screws
DIN 7997
螺桿和螺柱
牙條 Threaded rod
DIN 975
螺桿 Metric thread stud bolts
DIN 976-1
螺桿過盈配合螺紋 Metric interference-fit thread stud bolts
DIN 976-2
• Welding studs for turnbuckles
DIN 34828
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-3
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-4
• Hexagon bolts with flange-Small series
DIN EN 1662
• Hexagon bolts with flange-Heavy series
DIN EN 1665
• Hexagon bolts with flange with metric fine pitch thread
DIN EN 14219
• High-strength structural bolting assemblies for preloading
DIN EN 14399-3
• High-strength structural bolting assemblies for preloading
DIN EN 14399-4
• Hexagon head bolts with reduced shank
DIN EN 24015
• Hexagon head bolts(Product grade A and B)
DIN EN ISO 4014
• Hexagon head bolts(Product grade C)
DIN EN ISO 4016
鉚釘
半圓頭鋼鉚釘公稱直徑10~36mm Steel round head rivets with nominal diameters from 10 to 36 mm
DIN 124
沉頭鋼鉚釘公稱直徑10~36mm Steel countersunk head rivets with nominal diameters from 10 to 36 mm
DIN 302
半圓頭鉚釘公稱直徑1~8mm Round head rivets with nominal diameters from 1 to 8 mm
DIN 660
沉頭鉚釘公稱直徑1~8mm Countersunk head rivets with nominal diameters from 1 to 8 mm
DIN 661
半沉頭鉚釘公稱直徑1.6~6mm Oval-head rivets with nominal diameters from 1,6 to 6 mm
DIN 662
大半圓頭鉚釘公稱直徑1.6~6mm Mushroom head rivets with nominal diameters from 1,6 to 6 mm
DIN 674
沉頭鉚釘公稱直徑3~5mm Flat countersunk head rivets with nominal diameters from 3 to 5 mm
DIN 675
鉚釘用具 Rivet sets
DIN 6434
盤頭半空心鉚釘公稱直徑1.6~10mm Semitubular pan head rives with nominal diameters from 1,6 to 10 mm
DIN 6791
沉頭半空心鉚釘公稱直徑1.6~10mm Semitubular countersunk head rivets with nominal diameters from 1,6 to 10 mm
DIN 6792
沖制鉚釘 Compression rivets
DIN 7331
開口型盲鉚釘 Break mandrel blind rivets
DIN 7337
開口型和封閉型鉚釘 Break and clutch lining rivets
DIN 7338
板料拉延管鉚釘 One-piece tubular rivets drawn from strip
DIN 7339
管制空心鉚釘 Tubular rivets made from tube
DIN 7340
• Steel round head rivets
DIN 124
• Round head rivets
DIN 660
• Countersunk head rivets
DIN 661
• Oval-head rivets
DIN 662
• Mushroom head rivets
DIN 674
• Flat countersunk head rivets
DIN 675
• Semitubular pan head rivets. With nominal diameters from 1,6 to 10mm
DIN 6791
• Compression rivets
DIN 7331
• Brake and clutch lining rivets
DIN 7338
• One-piece tubular rivets
DIN 7339
• Tubular rivets
DIN 7340
• Rivet pins
DIN 7341
• Grooved pins with countersunk head
DIN EN ISO 8747
螺母
非金屬嵌件六角法蘭面鎖緊螺母 Prevailing torque type hexagon nuts with flange(with non-metallic insert)
DIN EN 1663 | 代替DIN 6926
非金屬嵌件六角鎖緊薄螺母 Prevailing torque type hexagon thin nuts (with non-metallic insert )
DIN EN ISO 10511 | 代替DIN 985
鋼結構用大六角螺母 Steel hexagon nuts with large widths across flats for high - strength structural bolting
DIN 6915
塑料六角螺母 Plastic hexagon nuts
DIN 34814
六角法蘭面螺母 Hexagon nuts with flange
DIN EN 1661 | 代替DIN 6923
• 1型六角螺母產品等級ABHexagon nuts,style 1-Product grades A and B
DIN EN ISO 4032 | 代替DIN 934
• 2型六角螺母產品等級ABHexagon nuts,style 2-Product grades A and B
DIN EN ISO 4033
六角螺母產品等級CHexagon nuts - Product grade C
DIN EN ISO 4034 | 代替DIN 555
方螺母產品等級CProduct grade C square nuts
DIN 557
薄型方螺母產品等級BSquare thin nuts - Product grade B
DIN 562
六角薄螺母(倒角型)產品等級ABHexagon thin nuts(chamfered)-Product grade A and B
DIN EN ISO 4035 | 代替DIN 439-2
六角薄螺母(無倒角型)產品等級BHexagon thin nuts - Product grade B(unchamfered)
DIN EN ISO 4036 | 代替DIN 439-1
• 1型六角螺母細牙螺紋產品等級ABHexagon nuts,style 1,with metric fine pitch thread - Product grades A and B
DIN EN ISO 8673 | 代替DIN 934|DIN 971-1
• 2型六角螺母細牙螺紋產品等級ABHexagon nuts,style 2,with metric fine pitch thread - Product grades A and B
DIN EN ISO 8674 | 代替DIN 971-2
六角薄螺母細牙螺紋產品等級ABHexagon thin nuts with metric fine pitch thread - Product grades A and B
DIN EN ISO 8675 | 代替DIN 439-2
六角開槽螺母粗牙螺紋和細牙螺紋產品等級ABHexagon slotted nuts and caltle nuts with metric coarse and fine pitch thread - Product grades A and B
DIN 935-1
六角開槽螺母產品等級CHexagon slotted nuts with metric coarse pitch thread - Product grade C
DIN 935-3
六角開槽薄螺母產品等級ABHexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread - Product grade A and B
DIN 979
六角蓋形螺母扁球型 Hexagon cap nuts
DIN 917
六角蓋形螺母半圓球型 Hexagon domed cap nuts
DIN 1587
非金屬嵌件六角組合式蓋形鎖緊螺母 Prevailing torque hexagon domed cap nuts with non-metallic insert
DIN 986
• 1型全金屬六角鎖緊螺母性能等級5、810Prevailing torque type all-metal hexagon nuts,style 1- Property classes 5,8 and 10
DIN EN ISO 7719
開槽螺塞(螺紋塞) Screwed inserts(screw plugs)
DIN 7965
沖壓自鎖螺母 Self-locking counter nuts
DIN 7967
三角凸緣螺母礦山用防雷防爆電氣設備用 Triangular nuts for use with electrical equipment in mining
DIN 22425
小對邊薄螺母粗牙和細牙 Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN 80705
全金屬六角法蘭面鎖緊螺母 Prevailing torque type all-metal hexagon nuts with flange
DIN EN 1664 | 代替DIN 6927
非金屬嵌件六角法蘭面鎖緊螺母-細牙 Prevailing torque type hexagon nuts with flange(with non-metallic insert)with metric fine pitch thread
DIN EN 1666 | 代替DIN 6926
全金屬六角法蘭面鎖緊螺母-細牙 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
DIN EN 1667 | 代替DIN 6927
• 1型非金屬嵌件六角鎖緊螺母性能等級5、810Prevailing torque type hexagon nuts (with non-metallic insert),style 1 - Property classes 5,8 and 10
DIN EN ISO 7040 | 代替DIN 982|DIN 6924
• 2型全金屬六角鎖緊螺母性能等級5、8、1012Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5,8, 10 and 12
DIN EN ISO 7042 | 代替DIN 980|DIN 6925
• 1型非金屬嵌件六角鎖緊螺母細牙性能等級6、810Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with metric fine pitch thread-Property classes 6,8 and 10
DIN EN ISO 10512 | 代替DIN 982|DIN 6924
• 2型全金屬六角鎖緊螺母細牙性能等級8、1012Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread - Property classes 8,10 and 12
DIN EN ISO 10513 | 代替DIN 980|DIN 6925
焊接方螺母 Square weld nuts
DIN 928
焊接六角螺母 Hexagon weld nuts
DIN 929
焊接六角法蘭面螺母 Hexagon weld nuts with flange
DIN 977
圓頭滾花螺母 Knurled nuts with collar
DIN 466
圓頭滾花薄螺母 Knurled nuts
DIN 467
厚圓頭滾花螺母 Knurled nuts
DIN 6303
蝶形螺母方翼 Wing nuts with edged wings
DIN 314
蝶形螺母圓翼 Wing nuts with rounded wings
DIN 315
管螺母螺紋符合ISO 228-1 Pipe nuts with thread as in ISO 228-1
DIN 431
圓螺母端面開槽 Slotted round nuts
DIN 546
圓螺母端面帶孔 Round nuts with drilled holes in one face
DIN 547
圓螺母惻面帶孔 Round nuts with set pin holes in side
DIN 548
吊耳螺母 Lifting eye nuts
DIN 582
圓型套筒螺母鋼制 Turnbuckles made from steel tube or round steel bars
DIN 1478
六角套筒螺母 Hexagon turnbuckles
DIN 1479
套筒螺母組合開啟型 Turnbuckles,forgedopen type)
DIN 1480
六角螺母腰狀桿螺栓連接副用 Hexagon nuts for use with bolts with waisted shank
DIN 2510-5
罩螺母腰狀桿螺栓連接副用 Cap nuts for use with bolts with waisted shank
DIN 2510-6
受力管套腰狀桿螺栓連接副用 Sleeves for use with bolts with waisted shank
DIN 2510-7
六角螺母—m=1.5d Hexagon nuts with a height of 1,5d
DIN 6330
六角凸緣螺母—m=1.5d Hexagon collar nuts with a height of 1,5d
DIN 6331
專用地腳螺釘用地腳螺母
DIN 798-1972
六角薄螺母(老標準)(產品等級AB級)
DIN 936-1985
六角冕形薄螺母(原類型)
DIN 937-1987
六角開槽薄螺母和六角冕形薄螺母米制粗牙和細牙產品等級AB
DIN 979-1987
汽車和拖車用圓盤輪螺母螺柱定心用緊固件
DIN 74361-1982 2部分
載重汽車和拖掛車的圓盤輪外部件緊固件
DIN 74361-1979 3部分
• Wing nuts with edged wings
DIN 314
• Pipe nuts with thread as in ISO 228-1
DIN 431
• Knurled nuts with collar
DIN 466
• Short knurled nuts
DIN 467
• Slotted round nuts
DIN 546
• Round nuts with drilled holes in one face
DIN 547
• Round nuts with set pin holes in side
DIN 548
• Product grade C square nuts
DIN 557
• Square thin nuts
DIN 562
• Eyenuts for lifting purposes
DIN 582
• Hexagon cap nuts
DIN 917
• Overview of European Standards for fasteners
DIN 918
• Square weld nuts
DIN 928
• Hexagon weld nuts
DIN 929
• Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread(Product grade A and B)
DIN 935-1
• Hexagon slotted nuts with metric coarse pitch thread(Product grade C)
DIN 935-3
• Hexagon thin slotted nuts and castle nuts with metric coarse and fine pitch thread(Product grade A and B)
DIN 979
• Prevailing torque type hexagon domed cap nuts with non-metallic insert
DIN 986
• Hexagon domed cap nuts
DIN 1587
• Boloted connections with reduced shank hexagon nuts
DIN 2510
• Knurled nuts
DIN 6303
• Hexagon nuts with a height of 1,5 d
DIN 6330
• Hexagon nuts with collar,with a height of 1,5 d
DIN 6331
• Plastic hexagon nuts
DIN 34814
• Plastic washers. large series
DIN 34816
• Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN 80705
• Hexagon nuts with flange
DIN EN 1661
• Prevailing torque type hexagon nuts with flange(with non-metallic insert)
DIN EN 1663
• Prevailing torque type all-metal hexagon nuts with flange
DIN EN 1664
• Prevailing torque type hexagon nuts with flange(with non-metallic insert),with metric fine pitch thread
DIN EN 1666
• Prevailing torque type all-metal hexagon nuts with flange,with metric fine pitch thread
DIN EN 1667
• Hexagon nuts with flange. Fine pitch thread
DIN EN 14218
• Hexagon nuts,style 1(Product grades A and B)
DIN EN ISO 4032
• Hexagon nuts,style 2(Product grades A and B)
DIN EN ISO 4033
• Hexagon nuts(Product grades C)
DIN EN ISO 4034
• Hexagon thin nuts(chamfered)(Product grades A and B)
DIN EN ISO 4035
• Hexagon thin nuts(unchamfered)(Product grades B)
DIN EN ISO 4036
• Tolerances for fasteners
DIN EN ISO 4759
• Prevailing torque type hexagon nuts(with non-metallicinsert),style 1 Property classes5,8 and 10
DIN EN ISO 7040
• Prevailing torque type hexagon nuts(with non-metallicinsert),style 2 -Property classes 5,8,10 and 12
DIN EN ISO 7042
• Hexagon nuts,style 1,with metric fine pitch thread (Product grades B)
DIN EN ISO 8673
• Hexagon nuts,style 2,with metric fine pitch thread (Product grades A and B)
DIN EN ISO 8674
• Prevailing torque type hexagon thin nuts(with non-metallic insert)
DIN EN ISO 10511
• Prevailing torque type all-metal hexagon nuts,style 1 Property classes 5,8 and 10
DIN EN ISO 7719
• Hexagon thin nuts (chamfered)with metric fine pitch thread(Product grades A and B)
DIN EN ISO 8675
• Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with metric fine pitch thread-Property classes6,8 and 10
DIN EN ISO 10512
• Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread-Property classes8,10 and 12
DIN EN ISO 10513
• Hexagon weld nuts with flange
DIN EN ISO 21670
• Bolted connections with reduced shank
DIN 2510
非釬焊和釬焊壓合接頭.管接螺母系列LL Non-soldering and soldering compression fittings - Union nuts series LL
3870-2001 | 代替DIN 3870-1985;DIN 3870-19
墊圈
十字槽盤頭螺釘產品等級APan head screws with type H or type Z cross recess-Product grade A
DIN EN ISO 7045 | 代替DIN 7985
十字槽沉頭(通用頭型)螺釘-產品等級A級-第1部分:性能等級 鋼 4.8Countersunk flat head screws (common head style)with type H or type Z cross recess,product grade A-Part 1:Steel of property class 4.8
DIN EN ISO 7046-1 | 代替DIN 965
彈簧墊圈 (DIN 127) Helical spring lock washers,sprint steel
127
鋼制的,普通系列平墊圈 Flat Washers, steel normal series
125B | 代替7090
鋼制的,普通系列平墊圈 Flat Washers, steel normal series
125A
方墊圈木結構用 Square washers for use in timber constructions
DIN 436
方孔方墊圈木結構用 Washers with square hole for use in timber constructions
DIN 440
粗制平墊圈螺栓用 Washers,coarse type,or bolts
DIN 1441
精制平墊圈 Washers for clamping devices
DIN 6340
平墊圈帶重型夾緊套螺栓用 Plain washers for bolts with heavy clamping sleeves
DIN 7349
塑料墊圈標準系列 Plastic washers-Standard series
DIN 34815
塑料墊圈大系列 Plastic washers-Large series
DIN 34816
銷軸用平墊圈產品等級APlain washers for use with clevis pins-Product grade A
DIN EN 28738 | 代替DIN 1440
平墊圈標準系列產品等級APlain washers-Normal series-Product grade A
DIN EN ISO 7089
平墊圈倒角型標準系列產品等級APlain washers,chamfered-Normal series-Product grade A
DIN EN ISO 7090
平墊圈標準系列產品等級CPlain washers-Normal series-Product grade C
DIN EN ISO 7091
平墊圈小系列產品等級APlain washers-Small series-Product grade A
DIN EN ISO 7092
平墊圈大系列第一部分:產品等級APlain washers-Large series-Part 1: Product grade A
DIN EN ISO 7093-1
平墊圈標準系列3部分:產品等級CPlain washers-Normal series-Part 3: Product grade C
DIN EN ISO 7093-2
平墊圈特大系列產品等級CPlain washers-Extra large series -Product grade C
DIN EN ISO 7094
長單耳止動墊片 Tab washers with long tab
DIN 93
彈簧墊圈 Curved spring lock washers
DIN 128
波形彈性墊圈 Wave spring washers
DIN 137
外舌止動墊片 External tab washers(locking tab washers)
DIN 432
雙耳止動墊片 Tab washers with short and long tab at right angles
DIN 463
安全杯—DIN84開槽圓柱頭螺釘用 Safety cups for cheese head screws according to DIN 84
DIN 526
密封墊圈 Shim rings and supporting rings
DIN 988
螺栓、螺母組合件用錐形彈性墊圈 Conical spring washers for bolt/nut assemblies
DIN 6796
鋸齒鎖緊彈性墊圈 Toothed lock washers
DIN 6797
外鋸齒鎖緊墊圈 Serrated lock washers
DIN 6798
螺釘和墊圈組合件用波形彈性墊圈 Curved spring washers for screw and washer assemblies
DIN 6904
螺釘和墊圈組合件用彈簧墊圈 Spring lock washers for screw and washer assemblies
DIN 6905
螺釘和墊圈組合件用外鋸齒鎖緊墊圈 Serrated lock washers with extermal teeth for screw and washer assemblies
DIN 6907
螺釘和墊圈組合件用錐形彈性墊圈 Conical sring washers for screw and washer assemblies
DIN 6908
自攻螺釘和墊圈組合件用平墊圈標準系列和大系列產品等級APlain washers for tapping screw and washer assemblies - Normal and large series - Product grade A
DIN EN ISO 10669
螺釘和墊圈組合件用平墊圈小系列、標準系列及大系列產品等級APlain washers for screw and washer assemblies - Small,normal and large series - Product grade A
DIN EN ISO 10673
槽鋼用方斜墊圈 Square taper washers for use with channel sections
DIN 434
• I型工字鋼用方斜墊圈 Square taper washers for use with I sections
DIN 435
鋼結構高強度螺栓連接圓墊圈 Round washers for high-strength structural steel bolting
DIN 6916
鋼結構高強度螺栓連接—I型工字鋼用方斜墊圈 Square taper washers for high-strength structural bolting of steel I sections
DIN 6917
鋼結構高強度螺栓連接槽鋼用方斜墊圈 Square taper washers for high-strength structural bolting of steel channel sections
DIN 6918
鋼結構用墊圈產品等級CWashers for use in structural steelwork - Product grade C
DIN7989-1
鋼結構用墊圈產品等級AWashers for use in structural steelwork - Product grade A
DIN7989-2
密封墊圈 Shim rings and supporting rings
DIN 988
平墊圈重型螺栓用 Plain washers for bolts with heavy clamping sleeves
DIN 7349
• Shim rings and supporting rings
DIN 988
• Plain washers. For bolts with heavy clamping sleeves
DIN 7349
• Blind rivets
DIN EN ISO 14589
• Square taper steel washers for use with channel sections
DIN 434
• Square taper steel washers for use with I sections
DIN 435
• Square washers
DIN 436
• Washers with square hole for use in timber constructions
DIN 440
• Shim rings and supporting rings
DIN 988
• Washers type coarse for bolts
DIN 1441
• Washers for clamping devices
DIN 6340
• Conical spring washers. for bolt/nut assemblies
DIN 6796
• Conical spring washers
DIN 6908
• Square taper washers. For high-strength structural bolting of steel | sections
DIN 6917
• Square taper washers. For high-strength structural bolting of steel channel sections
DIN 6918
• Plain washers. For Bolts with Heavy Clamping Sleeves
DIN 7349
• Washers for use in structural steelwork(Product grade C)
DIN 7989-1
• Washers for use in structural steelwork(Product grade A)
DIN 7989-2
• Chamfered plain washers for use in structural steelwork
DIN 34820
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-5
• High-strength structural bolting assemblies. For preloading
DIN EN 14399-6
• Plain washers-Normal series(Product grades A)
DIN EN ISO 7089
• Plain washers,chamfered-Normal series(Product grades A)
DIN EN ISO 7090
• Plain washers-Normal series(Product grades C)
DIN EN ISO 7091
• Plain washers-Small series(Product grades A)
DIN EN ISO 7092
• Plain washers-Large series(Product grades A)
DIN EN ISO 7093-1
• Plain washers-Large series(Product grades C)
DIN EN ISO 7093-2
• Plain washers-Extra large series(Product grades C)
DIN EN ISO 7094
• Plain washers for tapping screw and washer assemblies(Product grades A)
DIN EN ISO 10669
• Plain washers for screw and washer assemblies Small,normal nad large series (Product grades A)
DIN EN ISO 10673
擋圈
軸用開口彈性擋圈 Lock washers (retaining washers) for shafts
DIN 6799
孔用擋圈標準型和重型 Circlips (retaining rings) for bores - Normal type and heavy type
DIN 472
軸用擋圈帶外凸耳型 Retaining rings with lugs for use on shafts (external circlips)
DIN 983
軸用鋼絲擋圈及擋圈槽 Round wire snap rings and snap ring grooves for shafts and bores
DIN 7993
軸用擋圈標準型和重型 Circlips (retaining rings)for shafts - Normal type and heavy type
DIN 471
孔用擋圈帶內凸耳型 Spring retaining rings with lugs for use in bores (internal circlips)
DIN 984
• Circlips(retaining rings)for shafts
DIN 471
• Circlips(retaining rings)for bores
DIN 472
• Retaining rings with lugs
DIN 983
• Spring retaining rings with lugs
DIN 984
• Lock washers
DIN 6799
• Round wire snap rings and snap ring grooves. For shafts bores
DIN 7993
銷及鍵
彈性圓柱銷開槽輕型 Spring-type straight pins,slotted,light duty
DIN EN ISO 13337 | 代替DIN 7346
重型傳動連接楔形鍵斜鍵和鍵槽型式及尺寸 Stressed-type fastenings with taper action-Taper keys keyways-Dimensions and application
DIN 6886
半圓鍵和鍵槽型式及尺寸 Drive-type fastenings without taper action-Woodruff keys-Dimensions and application
DIN 6888
彈性圓柱銷開槽重型 Spring-type straight pins,slotted,heavy duty
DIN EN ISO 8752 | 代替DIN 1481
機床用平鍵傳動連接鍵和鍵槽型式及尺寸 Drive-type fastenings without taper action-Parallel keys,keyways,deep pattern for machine tools-Dimensions and application
DIN 6885-2
薄型平鍵傳動連接鍵和鍵槽型式及尺寸 Drive-type fastenings without taper action-Parallel keys,shallow action-Dimensions and application
DIN 6885-3
彈性開口銷 Spring cotters
DIN 11024
開口銷 Split pins
DIN EN ISO 1234 | 代替DIN 94
腰型頭軸肩銷軸 Clevis pins with head and stud end
DIN 1445
圓柱銷 Clevis pins without head
DIN EN 22340 | 代替DIN 1443
銷軸 Clevis pins with head
DIN EN 22341 | 代替DIN 1444
彎頭楔鍵和鍵槽型式及尺寸 Taper key torque transmission-Gib-head saddle keys-Dimensions and application
DIN 6889
交變載荷用楔鍵和楔鍵槽 Tangential keys and tangential keyways for alternating shock loads
DIN 268
單一載荷用楔鍵和楔鍵槽 Tangential keys and tangential keyways for constant loads
DIN 271
平鍵用鋼一型式、尺寸、重量及允許偏差 Bright key steel-Dimensions,permissible variations,weights
DIN 6880
鞍形楔鍵扭矩傳輸尺寸及安裝連接要求 Taper key torque transmission-Saddle keys-Dimensions and application
DIN 6881
楔鍵扭矩傳輸尺寸及安裝連接要求 Taper key torque transmission-Parallel keys-Dimensions and application
DIN 6883
彎頭楔鍵扭矩傳輸尺寸及安裝連接要求 Taper key torque transmission-Gib-head parallel keys-Dimensions and application
DIN 6884
平鍵傳動連接鍵和鍵槽型式及尺寸 Drive-type fastenings without taper action-Parallel keys,keyways,deep pattern
DIN 6885-1
外螺紋圓錐銷 Taper pins with thread ends and constant taper lengths
DIN 258
槽銷 Grooved pins,half - length grooved,with gorge
DIN 1469
固定銷 Rivet pins
DIN 7341
圓錐銷內螺紋 Unhardened taper pins
DIN EN 22339 | 代替DIN 1
內螺紋圓錐銷不淬硬 Unhardened taper pins with internal thread
DIN EN 28736 | 代替DIN 7978
外螺紋圓錐銷不淬硬 Unhardened taper pins with external thread
DIN EN 28737 | 代替DIN 7977
圓柱銷不淬硬鋼和奧氏體不銹鋼 Parallel pins,of unhardened steel and austenitic stainless steel
DIN EN ISO 2338 | 代替DIN 7
內螺紋圓柱銷不淬硬鋼和奧氏體不銹鋼 Parallel pins whit internal thread,of unhardened steel and austenitic stainless steel
DIN EN ISO 8733 | 代替DIN 7979
圓柱銷-淬硬鋼和馬氏體不銹鋼(定位銷) Parallel pins,of hardened steel or martensitic stainless steel(Dowel pins)
DIN EN ISO 8734 | 代替DIN 6325
內螺紋圓柱銷-淬硬鋼和馬氏體不銹鋼 Parallel pins with internal thread,of hardened steel and martensitic stainless steel
DIN EN ISO 8735 | 代替DIN 7979
槽銷帶導桿及全長平行溝槽 Grooved pins,full - length parallel grooved,with pilot
DIN EN ISO 8739 | 代替DIN 1470
槽銷帶倒角及全長平行溝槽 Grooved pins,full - length parallel grooved,with chamfer
DIN EN ISO 8740 | 代替DIN 1473
槽銷半長倒錐槽 Grooved pins,half - length reverse - taper grooved
DIN EN ISO 8741 | 代替DIN 1474
槽銷中部槽長為1/3全長 Grooved pins,one - third -length centre grooved
DIN EN ISO 8742 | 代替DIN 1475
槽銷中部槽長為1/2全長 Grooved pins,half-length centre grooved
DIN EN ISO 8743
槽銷全長錐槽 Grooved pins,full-length taper grooved
DIN EN ISO 8744 | 代替DIN 1471
槽銷半長錐槽 Grooved pins,half-length taper grooved
DIN EN ISO 8745 | 代替DIN 1472
圓頭槽銷 Grooved pins with round head
DIN EN ISO 8746 | 代替DIN 1476
沉頭槽銷 Grooved pins with countersunk head
DIN EN ISO 8747 | 代替DIN 1477
彈性圓柱銷卷制重型 Spring-type straight pins,coiled,heavy duty
DIN EN ISO 8748 | 代替DIN 7344
彈性圓柱銷卷制標準型 Spring-type straight pins,coiled,standard duty
DIN EN ISO 8750 | 代替DIN 7343
彈性圓柱銷卷制輕型 Spring-type straight pins,coiled,light duty
DIN EN ISO 8751
重型傳動連接楔形鍵彎頭斜鍵和鍵槽型式及尺寸 Stressed-type fastenings with taper action-Taper keys with gib heads,keyways-Dimensions and application
DIN 6887
• Taper Pins
DIN 258
• Tangential keys and Tangential keyways .for Alternating shock loads
DIN 268
• Tangential Keys and Tangential Keyways .for Constant loads
DIN 271
• Steel countersunk head rivets
DIN 302
• Moulding nails
DIN 1163
• Grooved pins,Half Length Grooved with Gorge
DIN 1469
• Rivet sets
DIN 6434
• Bright key steel
DIN 6880
• Taper key torque transmission
DIN 6881
• Taper key torque Transmission
DIN 6883
• Drive Type Fastenings without Taper Action
DIN 6885
• Stressed-type Fastenins with Taper Action
DIN 6886
• Stressed-type fastenings with taper action
DIN 6887
• Drive type fastenings without taper action
DIN 6888
• Taper key torque transmission
DIN 6889
• Spring Cotters
DIN 11024
• Unhardened taper pins
DIN EN 22339
• Clevis pins without head
DIN EN 22340
• Clevis pins with head
DIN EN 22341
• Unhardened taper pins with internal thread
DIN EN 28736
• Unhardened taper pins with external thread
DIN EN 28737
• Plain washers for use with clevis pins(product grade A)
DIN EN 28738
• Determination of shear strength of pins
DIN EN 28739
• Split pins
DIN EN ISO 1234
• Parallel pins,of unhardened steel and austenitic stainless steel
DIN EN ISO 2338
• Parallel pins,of hardened steel or martensitic stainless steel(dowel pins)
DIN EN ISO 8734
• Parallel pins with internal thread,of unhardened steel and austenitic stainless steel
DIN EN ISO 8733
• Parallel pins with internal thread,of hardened steel and martensitic stainless steel
DIN EN ISO 8735
• Grooved pins,full-length parallel grooved,with pilot
DIN EN ISO 8739
• Grooved pins,full-length parallel grooved,with chamfer
DIN EN ISO 8740
• Grooved pins,full-length reverse-taper grooved
DIN EN ISO 8741
• Grooved pins,one-third-length centre grooved
DIN EN ISO 8742
• Grooved pins,half-length centre grooved
DIN EN ISO 8743
• Grooved pins,full-length taper grooved
DIN EN ISO 8744
• Grooved pins,half-length taper grooved
DIN EN ISO 8745
• Grooved pins,with round head
DIN EN ISO 8746
• Spring-type straight pins,coiled,heavy duty
DIN EN ISO 8748
• Spring-type straight pins,coiled,standard duty
DIN EN ISO 8750
• Spring-type straight pins,coiled,light duty
DIN EN ISO 8751
• Spring-type straight pins,slotted,heavy duty
DIN EN ISO 8752
• Spring-type straight pins,slotted,light duty
DIN EN ISO 13337
• Closed end blind rivets with break pull mandrel and proruding head-AI/A|A
DIN EN ISO 15975
• Closed end blind rivets with break pull mandrel and proruding head-ST/ST
DIN EN ISO 15976
• Open end blind rivets with bread pull mandrel and protruding head-A|A/ST
DIN EN ISO 15977
• Open end blind rivets with bread pull mandrel and protruding head-A|A/ST
DIN EN ISO 15978
• Open end blind rivets with bread pull mandrel and protruding head-ST/ST
DIN EN ISO 15979
• Open end blind rivets with bread pull mandrel and countersunk head-ST/ST
DIN EN ISO 15980
• Open end blind rivets with bread pull mandrel and countersunk head-A|A/A|A
DIN EN ISO 15981
• Open end blind rivets with bread pull mandrel and countersunk head-A|A/A|A
DIN EN ISO 15982
• Open end blind rivets with bread pull mandrel and countersunk head-A2/A2
DIN EN ISO 15983
• Open end blind rivets with bread pull mandrel and countersunk head-A2/A2
DIN EN ISO 15984
• Open end blind rivets with bread pull mandrel and protruding head-CU/ST or Cu/Bu or Cu/SSt
DIN EN ISO 16582
• Open end blind rivets with bread pull mandrel and countersunk head-CU/ST or Cu/Br or Cu/SSt
DIN EN ISO 16583
• Open end blind rivets with bread pull mandrel and protruking head-NiCu/St or NiCu/SSt
DIN EN ISO 16584
• Open end blind rivets with bread pull mandrel and protruking head-A2/SSt
DIN EN ISO 16585
• Turnbuckles made from steel tubes or round steel bars
DIN 1478
• Forged turnbuckles(open type)
DIN 1480
• Split pins
DIN EN ISO 1234
組合件和連接副
鋼結構用開槽沉頭螺釘和六角螺母連接副 Steel slotted countersunk head screws for structural steel bolting for supply with hexagon nuts
DIN 7969
鋼結構用大六角頭鉸制孔高強度螺栓和六角螺母連接副 High-strength hexagon fit bolts with large widths across flats for structural steel bolting
DIN 7999
螺釘和波形彈性墊圈的組合件 Screw and washer assemblies - Coarse threaded screws with captive wave spring washer
DIN 6900-2
螺釘和鞍形彈性墊圈的組合件 Screw and washer assemblies - Coarse threaded screws with captive curved spring lock washer
DIN 6900-3
螺釘和鋸齒形鎖緊彈性墊圈的組合件 Screw and washer assemblies - Coarse threaded screws with captive serrated lock washer
DIN 6900-4
螺釘和錐形彈性墊圈的組合件 Screw and washer assemblies - Coarse threaded screws with captive conical spring washer
DIN 6900-5
螺釘和錐形彈性墊圈的組合件墊圈硬度200HV 300HV Screw and washer assemblies with plain washers-Washer hardness classes 200HV and 300HV
DIN EN ISO 10644
雙頭螺柱旋入端長度≈2d Studs with a length of engagement equal to about 2d
DIN 835
雙頭螺柱旋入端長度≈1d Studs with a length of engagement equal to about 1d
DIN 938
雙頭螺柱旋入端長度≈1.25d Studs with a length of engagement equal to about 1,25d
DIN 939
雙頭螺柱旋入端長度≈2.5d Studs with a length of engagement equal to about 2,5d
DIN 940
雙頭螺柱旋入端長度≈2d—過盈配合螺紋(A型) Metric interference-fit thread studs with a length of engagement equal to about 2d(type A)
DIN 949-1
雙頭螺柱旋入端長度≈2.5d—過盈配合螺紋(B型) Metric interference-fit thread studs with a length of engagement equal to about 2,5d(type B)
DIN 949-2
自攻螺釘和平墊圈組合件 Tapping screw and washer assemblies with plain washers
DIN EN ISO 10510
• Hexagon turnbuckles
DIN 1479
• Screw and washer assemblies
DIN 6900-5
• Screwed Ineerts(screw plugs)
DIN 7965
釘子
射釘 Round plain head nails for use in automatic nailing machines
DIN 1143-1
木釘用于刨花合成板 Nails for the installation of wood wool composite panels
DIN 1144
平頭和沉頭鋼釘 Round plain head and countersunk head wire nails
DIN 1151
圓柱頭鋼釘 Round lost head wire nails
DIN 1152
鋼釘用于裝飾 Decorator's tacks
DIN 1157
墻彎釘 Wall hooks
DIN 1158
大頭和石板瓦釘 Clout or slate nails
DIN 1160
模用長釘 Moulding nails
DIN 1163
鋼釘用于石膏板固定 Accessories for the installation of gypsum plasterboard-Nails
DIN 18182-4
鋼釘用于木托盤固定 Nails for assembling timber pallets
DIN 68163
• Round plain head nails
DIN 1143
• Decorator's tacks
DIN 1157
• Wall hooks
DIN 1158
• Accessories. For the installation of gypsum plasterboard
DIN 18182
• Nails for assembling timber pallets
DIN 68163
• Steel wire nails
DIN EN 10230-1

上海質品五金有限公司是專業的緊固件制造廠家之一,在同行業中享有較高的聲譽,產品遠銷全國各地,部分產品出口到國外,受到廣大用戶的一致好評;公司以創新、誠信、團隊、拼搏、感恩、永續經營的創業理念,以先進的管理、促進公司進步和發展,為緊固件產業貢獻智慧。我們不斷地學習來充實自己,我們不斷提高品質為客戶提供更多滿意的產品.主要生產和銷售國際標(ISO)、德標(DIN)、意標(UNI)、芬蘭標(SFS)、歐盟標準(EN)、法標(NF)、美標(ANSI)、日標(JIS)、國標(GB)等各類高品質的螺栓、螺釘、銷軸鍵、機械零配件、螺紋套、鉚釘及非標準特殊緊固件。公司的產品及客戶群體定位中高端.主要面向歐州在華企業及國內大中型企業.公司庫存產品主要為DIN.UNI.ISO標準產品.對于歐州標準的緊固件產品有很強的配套能力和解決方案.

    我司產品廣泛用于電子、機械、風力、液壓、汽車及新能源等行業。 緊固件的選材有:碳鋼、合金鋼、不銹鋼、銅、尼龍、塑料等。并可以根據客戶的生產需求對螺絲產品進行以下表面處理:鍍白鋅、黃鋅、黑鋅、鍍錫、鍍鎳、達克羅、久美特、機械鍍鋅、熱浸鍍鋅等。

    上海質品五金有限公司市場定位是工業品零配件供應商,將把國內及國外高品質機械及電子部件不斷推向市場,為成為卓越的工業品供應商而努力。

公司堅持以質量求生存,以科技求發展,以客戶滿意為導向;我們相信我們有能力將我們的產品做專、做精、做新、做全、做強、做大,為我們的合作伙伴提供滿意的產品和優質的服務!期望有更多的合作伙伴加入,共同打造明天的輝煌!

 

 

主要標準如下:

德國標準:

DIN1,DIN7,DIN79,DIN84,DIN85,DIN93、DIN94、DIN95、DIN96、DIN97、DIN125-A、DIN125-B、DIN126、DIN127-A、DIN127-B、DIN128-A、DIN128-B、DIN137-A、DIN137-B、DIN186、DIN188、DIN193、DIN196、DIN251、DIN258、DIN261、DIN315、DIN317、DIN319、DIN404、DIN417、DIN427、DIN431、DIN432、DIN433、DIN434、DIN436、DIN438、DIN439、DIN440、DIN443、DIN444、DIN462、DIN463、DIN464、DIN465、DIN466、DIN467、DIN470、DIN471、DIN472、DIN479、DIN480、DIN580、DIN582、DIN605、DIN610、DIN508、DIN525、DIN529、DIN546、DIN547、DIN551、DIN553、DIN555、DIN557、DIN558、DIN562、DIN571、DIN662、DIN741、DIN908、DIN601、DIN603、DIN604、DIN607、DIN608、DIN609、DIN653、DIN660、DIN661、DIN674、DIN703、DIN705、DIN787、DIN835、DIN906、DIN909、DIN910、DIN911、DIN912、DIN913、DIN914、DIN915、DIN916、DIN917、DIN920、DIN921、DIN922、DIN923、DIN927、DIN928、DIN929、DIN931、DIN933、DIN934、DIN935、DIN936、DIN937、DIN938、DIN939、DIN940、DIN960、DIN961、DIN962、DIN964、DIN965、DIN966、DIN970、DIN971、DIN972、DIN975、DIN976、DIN979、DIN980、DIN981、DIN982、DIN985、DIN986、DIN988、DIN1052、DIN1151、DIN1440、DIN1441、DIN1444、DIN1471、DIN1472、DIN1473、DIN1474、DIN1475、DIN1476、DIN1477、DIN1479、DIN1480、DIN1481、DIN1587、DIN1804、DIN1816、DIN2093、DIN3017、DIN3404、DIN3567、DIN3570、DIN6319、DIN6325、DIN6330、DIN6331、DIN6334、DIN6796、DIN6797-A、DIN6797-I、DIN6798-A、DIN6798-I、DIN6799、DIN6885、DIN6888、DIN6899、DIN6900、DIN6901、DIN6914、DIN6915、DIN6916、DIN6917、DIN6918、DIN6921、DIN6923、DIN6925、DIN7337、DIN7338、DIN7343、DIN7346、DIN7349、DIN7500、DIN7504、DIN7505、DIN7513、DIN7516、DIN7965、DIN7967、DIN7968、DIN7971、DIN7972、DIN7973、DIN7976、DIN7978、DIN7979、DIN7980、DIN7981、DIN7982、DIN7983、DIN7984、DIN7985、DIN7989、DIN7990、DIN7991、DIN7993、DIN7995、DIN7996、DIN7997、DIN8140、DIN9021、DIN11024、DIN13257、DIN18182、DIN28129、DIN70952、DIN71412、ISO7380、ISO7379

 

意大利標準:
UNI1336、UNI1707、UNI1751、UNI2947、UNI5449、UNI5531、UNI5588、UNI5589、UNI5590、UNI5593、UNI5594、UNI5596、UNI5714、UNI5721、UNI5731、UNI5732、UNI5737、UNI5739、UNI5911、UNI5923、UNI5925、UNI5927、UNI5929、UNI5931、UNI5933、UNI6107、UNI6109、UNI6110、UNI6364、UNI6592、UNI6592、UNI6593、 UNI6598、UNI6599、UNI6600、UNI6604A、UNI6753、UNI6873、UNI6949、 UNI6951、UNI6952、UNI6953、UNI6954、UNI6955、UNI6956、UNI701、UNI702、UNI703、UNI704、UNI7284、UNI7285、UNI7380 UNI7433、UNI7434、UNI7435、UNI7437、UNI7473、UNI7474、UNI7588、UNI7687、UNI7688、UNI7689、UNI8111/8112/8113、UNI8117/8118/8119、UNI8737、UNI8835、UNI8839、UNI8840A、UNI8840B、UNI8842A、UNI8842J、UNI9200A、UNI9200B、UNI EN28734、UNI EN28735

 

 

國際標準:
ISO1051、ISO10511、ISO10642、ISO1207、ISO1234、ISO13337、ISO1479、ISO1481、ISO1482、ISO1483、ISO1580、ISO2009、ISO2010、ISO2338、ISO2339、ISO2341、ISO2342、ISO2936、

ISO2982、ISO299、ISO299、ISO3266、ISO3912、ISO4014、ISO4016、ISO4017、ISO4018、ISO4027、ISO4028、ISO4029、ISO4032、ISO4032、ISO4034、ISO4035、ISO4161、ISO4762、ISO4766、ISO7035、ISO7038、ISO7040、ISO7042、ISO7045、ISO7046、ISO7047、ISO7049、ISO7050、ISO7051、ISO7089、ISO709、ISO7090、ISO7091、ISO7092、ISO7093、ISO7199、

ISO7379、 ISO7380、ISO7412、ISO7414、ISO7416、ISO7434、ISO7435、ISO7436、ISO773/2491、

ISO8673、ISO8674、ISO8675、ISO8676、ISO8677、ISO8734、ISO8735、ISO8736、ISO8737、

ISO8738、ISO8738、ISO8740、ISO8741、ISO8742、ISO8744、ISO8745、ISO8746、ISO8747、ISO8750、ISO8752、ISO8765、

 

中國標準:

GB14、 GB37、 GB39、 GB56、GB62、GB63、GB65、GB67、GB68、GB69、GB70.1、GB70.2、GB70.3、GB71、GB73、GB73、GB74、GB75、GB77、GB78、GB79、GB80、GB93、GB96、GB97.1、GB97.2、GB99、GB100、GB101、GB102、GB798、 GB799、GB802、GB806、GB807、GB808、GB812、GB815、GB816、GB818、GB817、GB81、GB820、

GB825、GB830、GB832、GB833、GB834、GB835、GB845、GB846、GB847、GB848、GB849、GB850、GB852、GB853、GB854、GB855、GB856、GB858、GB858、GB860、GB861.1、GB862.1、GB861.2、GB862.2、GB889.1、GB893、GB894、GB896、GB951、GB952、GB955、GB1096、GB1228、GB1229、GB1230、GB5281、GB5282、GB5283、GB5284、GB5285、GB5782、 GB5783、 GB5785、 GB5786、 GB5789、 GB6170、GB6171、GB6172、GB6172.1、GB6172.2、GB6173、GB6176、GB6177、GB6178、GB6181、GB6184、GB6185.1、GB7244、GB7245、GB7246、GB9074.1-.17、GB9074.18-.23、GB9074.18-.23、GB/T13680-92、GB/T13681-92

相關附件: 常用DIN標準.doc